EASTWOOD 14037 TIG, PLASMA AND CART KIT

Eastwood TIG, Plasma & Cart Kit includes Tig200 Welder, Plasma Cutter and Multi Unit Cart.

SKU: 14037

Manufacturer part number: 14037

Manufacturer: Eastwood

Be the first to review this product

$1,299.00

Qty:

About Eastwood TIG, Plasma & Cart Kit

TIG200 Welder

Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional machine. It has pre/post flow adjustment knobs to protect your weld and torch. If that's not enough, it even has a foot pedal to control amperage so you can get going quickly and not need to dial-in the machine for a specific material. Included is the TIG200, torch, ground cable/clamp, regulator/hose, and is powered through a NEMA50 plug.

Plasma Cutter

Eastwood's Versa Cut Plasma Cutter is an innovative, affordable, plasma cutter designed and developed by Eastwood, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

Multi-Unit Cart

This welding cart was designed by to make storage, accessibility and maneuverability of your welder and cutter easier than ever before. This cart incorporates a top shelf which will hold our MIG135, MIG175 or TIG-200 welder. The bottom shelf will store your Versa-Cut Plasma Cutter, while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.

SPECIFICATIONS

• Input voltage: single phase 110 or 220 VAC (+/- 15%) @ 50-60Hz
• Input amperage: 28 amp
• Output amperage: 10-200amp AC/DC
• No-load voltage: 51
• AC duty cycle (%): 20-80 (80% at 100 amp- 20% at 200 amp)
• Pulse duty cycle (%): 10-90
• Post gas flow: 2-8 sec
• Pre gas flow: 0.1-1 sec
• Remote foot pedal and control: yes
• Efficiency: (%): 80
• Weight: 44lbs
• The cleaning/clearance effect (AC balance control) of our unit is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive)
• The frequency is fixed at 60Hz which provides a little wider bead but with good penetration for aluminum and magnesium.
• The Tig 200 is constructed with inverter and MOSFET technology for optimum performance at a very affordable price.