Tiger Tool was founded by the owner of a fleet of highway trucks, who took care of his own truck maintenance. As it states on Tiger Tool's website, Founder Mike Skoworodko was attempting to remove a seized universal joint, but was contending with a driveline that could not be budged without causing surrounding damage. He wanted to develop a better way, and thus the world's most effective Universal Joint Puller was born! He then began to develop several other specialty tools directed at the Heavy-Duty Equipment Industry, and after attending several North American, and European tradeshows, sales began to skyrocket. Tiger Tool has a solid reputation with regard to design, and development of unique, specialized tools used for servicing the needs of the Light and Heavy-Duty Equipment Industry.
We at Clark Heintz Tools & Equipment LLC fully endorse these quality, rugged products. We've chosen a special line of Tiger Tools to carry that cover all the bases when trying to get the job done! Our Driveline Tiger Tools include Snap Ring Plier Kits, which come with the original 70300 Snap Ring Plier as well as the newer-to-the-line 70301 75 Degree Snap Ring Plier, to allow for easy removal of body panel clips and hotchkiss style snap rings in hard-to-reach areas. Also within the realm of driveline tools is the 14001 Torsion Bar, used with GM's K-35 series trucks with heavy duty chassis, which require a heavy-duty tool to deal with the larger torsion bar; Bearing Cup Installers, used for accurate installation of bolt-retained bearing cups; Yoke Pullers, which expedite and streamline the removal of automotive yokes on drive shafts, transmissions and rear-end differentials without damage to the yokes; Universal Joint Puller designed to fit drivelines 1500 series and under, on intermediate trucks, school buses, farm, and light industrial vehicles; and the 10803 Yoke Puller Kit, designed to remove yokes on transmissions, driveshafts, and rear-end differentials without damage to yokes or other components. Fits 16 different sizes of yokes.
Our featured axle shaft tool is the 11001 axle shaft puller. Among our slack adjuster tools, we carry the 10502 Slack Adjuster Rod Pin Press, the 10501 Brake Clevis Pin, used for virtually all makes and models of truck and trailer slack adjuster brake clevis pins; and several Slack Adjuster Pullers, including the 10406, 10407, 10409, and 10410. Wheel stud tools include a 22mm adapter (10630), Wheel Stud Adapter 1 1/8" Right Hand (10610), Wheel Stud Adapter 1 1/8" Left Hand (10615), Wheel Stud Adapter 3/4" Right Hand (10620), Wheel Stud Adapter 3/4" Left Hand (10625), 16001 Manual Stud and Anchor Service Kit, 10601 Wheel Stud Installer, and 10603 Wheel Stud & Brake Anchor Service Kit, which removes and install studs brake anchor pins and bushings quickly and without having to remove the hub!
Our Tie Rod Tools consist of various Tie Rod End Removers, including 10301 7/8" Tie Rod End Remover, 10302 3/4" Tie Rod End Remover, 10304 20mm Tie Rod End Remover, and last but not least, the 10310 Tie Rod End Remover Kit, which offers a safe and effective means to "shock" tie rod ends loose without risk of damage to threaded areas, grease nipples, and rubber seals. Fits tie rod end sizes 7/8" (heavy duty trucks), 3/4"(mid-size trucks), and 20mm (European trucks).
For hydraulic accessories, we carry the 70125 Air/Hydraulic Pump, made of corrosion-resistant, light-weight aluminum. It provides up to 10,000 psi.
Tiger's high strength adjustable pulling arms fit various widths of pitman arms for easy installation and removal of the tool. Our selection of Pitman Arm Tools includes 10386 Pitman Arm Spreader, which provides quick and safe removal of Pitman Arms on 2-ton and larger trucks. 10385 HD Pitman Arm Puller is designed to remove pitman arms on virtually all heavy-duty trucks; 10388 Intermediate Pitman Puller is made for school buses, intermediate trucks, delivery trucks, and any other vehicles with a nut release Pitman arm. The 20387 Pitman Arm Service Kit is truly a "must have" for any mechanic or shop servicing steering boxes.
The Tiger Tool Combination Kits consist of 20503 Automotive Universal Joint Kit Package, 20101 Universal Joint Puller Kit comes complete with 3 U-Joint Pullers: one each for heavy duty trucks, mid-size trucks, and cars and pickup trucks; 20150 Heavy-Duty U-Joint Service Kit for dismantling and assembling heavy-duty truck u-joints; 20301 Heavy-Duty Mechanic's Kit includes 5 heavy-duty parts including the 10102 U-Joint Puller; the 20201 Heavy-Duty Mechanic's Kit, 20401 Heavy Duty Mechanic's Kit includes 5 heavy-duty parts, including the 10102 U-Joint Puller; and the 20602 Slack Adjuster Service Kit comes with everything you need to service manual/automatic self-adjusting type slacks. So, as you can see, we cover a lot of ground in the Tiger Tool department. Please call Clark with any questions --or to place an order-- at 603-234-2612.