Plastic Waste Oil Drain Features:

• Drain plug tray
• Large 16-1/2" diameter funnel
• Easy height adjustment
• Built-in easy pour handle
• Translucent jug for easy level viewing
• (4) 2-1/2" oil resistant PVC casters for easy mobility
• Operating Temperature Range: -22 Deg F - 176 Deg F
• Capacity: 8 gal.
• Working Height Adjustment: 27" - 68.9"

The optional frame adapter set is available for most AMGO 2-post lifts. These special saddle adapters (used on the two rear arms in place of the standard round lift pads) are designed specifically to provide a secure lifting surface for those trucks that have the gas tank mounted very close to the frame. This saddle adapter set allows the frame to “sit inside the saddles” and provide a superior lifting surface.

The optional frame adapter set is available for most AMGO 2-post lifts. These special saddle adapters (used on the two rear arms in place of the standard round lift pads) are designed specifically to provide a secure lifting surface for those trucks that have the gas tank mounted very close to the frame. This saddle adapter set allows the frame to “sit inside the saddles” and provide a superior lifting surface.

Bright where you need it to be! AMGO’s new LED light kits are designed for most 2 posts lifts, both floor plate and clear floor. Easy installation using strong magnetic brackets, attached where you want them. They work with 110VAC to 220VAC input power.

Power Sport / Golf Lift Accessory for 2 post lifts - installation is simple and width is adjustable. This design can change the 2 post lift from chassis-support to wheel-support. It is fitted for lawn mower, golf cart, snowmobile, ATV, and low-chassis vehicles.

Features:

Lifting Capacity: 9,000 lbs.(4 wheels) /6,000 lbs. (3 wheels)
Adjustable Width Simple structure, easy to assemble.
Strengthen support platform.

Specifications
Lifting Capacity 9,000 lbs. (4 wheels) /6,000 lbs. (3 wheels)
Width (Adjustable) 110 1/4”~126”
Width of support platform 12 1/8″
Gross Weight: 428lbs
Single Lift Package Dimensions: 2850*400*375mm

• Capacity: Supports 1,500 lb. for exhaust, drivetrain, suspension, and other under-vehicle component service work
• Variant: Locking pin with preset height intervals speeds coarse setup before final spin-handle adjustment
• Height Range: Covers 57 in. to 78 in. height range for underhoist positioning and component support access
• Adjustment Control: Bearing Mounted Spin Handle and self-locking acme threaded screw support controlled height adjustment under load

• Capacity: Supports 1,500 lb. for exhaust, drivetrain, suspension, and other under-vehicle component service work
• Variant: Locking pin with preset height intervals speeds coarse setup before final spin-handle adjustment
• Height Range: Covers 57 in. to 78 in. height range for underhoist positioning and component support access
• Adjustment Control: Bearing Mounted Spin Handle and self-locking acme threaded screw support controlled height adjustment under load

Features

• Capacity: 1,650lbs each;
• Optional accessories changing the lift from chassis-support to wheel-support;
• Install on 2-post lift arms, with smart design, easy to fix or remove; suitable for all 2-post lifts of AMGO and most of the 2-post lifts in the market;
• The best application to tire Rim Dia. range 15″-17″;
• Suitable for the arm of 1 1/2” or 2” diameter hole;
• Highly recommend for extremely low-chassis or electric vehicles maintenance & battery replacement;
• G.W. 33 lbs each.

These adjustable adapters can quickly transform a two post lift from chassis support to wheel support. They provide a wide range of service for various vehicles, especially for EV maintenance & battery pack replacement and low chassis vehicles.

Capacity: 2,205lbs each
Optional accessories change the lift from chassis-support to wheel-support
Install on 2-post lift arms, easy to fix or remove
Best for tire rim diameter range 14″-22″
Suitable for the arms with both rubber pad insert hole diameter 1 1/2″ and 2″