Email: sales@nhproequip.com
Call 603-234-2612 or 603-219-0060
FREE SHIPPING ON MOST EQUIPMENT!
Search
Filters
   
Close
Blog archive
RSS

Blog posts tagged with 'manufacturing update'

Saylor Beall improves compressor performance by installing two stage hone
[caption id="attachment_4205" align="alignright" width="303"]2-stage-hone-saylor beall compressor New Saylor Beall Honing Machine[/caption] Saylor Beall has made a significant manufacturing improvement with the recent installation of a new two stage hone, and it has dramatically improved the performance of their air compressors. The hone provides for a rounder cylinder with more consistent micro-finish. It allows the piston ring to seal more closely against the cylinder, reducing the amount of oil that can pass downstream. The main advantage of two stage honing is the ability to perform a roughing operation, then come back and do the finish operation with much more accuracy. The machine uses CNC control to vary the honing speed, also switching to different grit stones needed for the finish operation. The machine also uses a brush final operation to knock off burrs or high spots that might have remained after the finish operation. While oil is a necessary evil, necessary to lubricate moving parts, disposing of it can be a challenge. Oil has always been an irritating side effect of air compressors. It often mixes with the compressed air, only to condensate later in the air system. It can cause valves to stick, and it can leak through gaskets. In today’s more environmentally conscious society, anything to reduce the impact of oil is considered a plus. This two-stage hone has been in production since March 2015, and Saylor Beall reports noticable improvements in their compressor pumps. Check out Saylor Beall Air Compressors here.