This Phoenix Tire Changer / Wheel Balancer Combo consists of the PWB1530A Wheel Balancer and PWC2900A Tilt Back Tire Changer with AL310 Helper Arm.
Manufacturer part number:
1-Year Parts Warranty on Both Units
Phoenix manufactures quality wheel service equipment at affordable prices. Have a look inside (right) a Phoenix tire changer you will see components such as metal air valves rather than plastic, a bead breaker cylinder built to last with 5500 lbs of force, a motor and transmission that run smooth without vibration that transfer plenty of power to handle even larger wheels, such as Ford F350. Foot control pedals operate metal air control valves structured for long trouble-free operation, unlike many higher priced products that use plastic valving but charge a premium price, perform no better, and do not last. Comparing Phoenix equipment with the big names you will learn Phoenix offers the same quality at a lower price (no big food chain to feed). We also offer better service; when you call, we answer. You won’t need to leave a message or pay ridiculous prices for replacement parts.
The top of the tire machine uses a large turntable (26″ or 28″), thick and rugged to handle large wheels. Behind the wheel clamps there are air jets, the part of the bead blaster which assists in seating the bead for mounting tires. The air supply tank is housed in the upright tower, eliminating the need for an exterior tank. The adjustable air regulator and water trap is mounted beside the automatic oiler, which is necessary to keep the machine lubricated – where there is compressed air, there is often moisture. The oiler drips oil into the machine each time you use a foot pedal function, spreading lubricant throughout the system and limiting wear on parts. It is easy to fill: just spin off the reservoir, on and off in a minute. Strong large cylinders under the turntable move the rim clamps in and out and provide a solid grip on wheels. Of course, the steel duck head — which removes and installs the tire on the wheel — is lined with plastic inserts to protect against damage to wheels.
**Included as a standard piece is an all plastic duck head you can install when working with high end wheels which are fragile. Other brands charge for this as an option, usually $70-$100.00.