Call 603-234-2612 or 603-219-0060
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
A great (BIG) lift !
First of all, I have to say what a pleasure it was dealing with the guys at NH ProEquip, top-notch guys, it sure is nice dealing with the owner himself. They took the time to answer my questions and it's great talking with people who know their stuff (they're both former Snap-on dealers)

Okay, on to the lift.
I drove 2 hours north to Clark's shop, there was a Pro 2500 on display. WOW ! Impressive.
Finally a lift that's wide enough, long enough, strong enough and lifts high enough...48 inches high ?  SOLD !!!
Clark got in his giant forklift and picked the 2 crates (one is the lift itself with main ramp, the other contains the side extensions and two smaller ramps) The electric/hydraulic pump and tire vise were in two small boxes.
My truck is a full size dually, 8-foot bed and the crates fit in perfectly.
Close the tonneau and the tailgate and we're off, right ?
Wrong !
Clark and I discussed "proper Load securement" and had a chuckle when he told me about a tailgate failure that happened to him once, where the load busted out and onto the street !        "Okay Clarke,  I guess I'll strap em in"...

Got the lift home, unloaded, and un-crated.
The contents were well wrapped, and packed, the paint job nice and unscratched. Everything appeared perfect.
Moved the lift where I wanted it, hooked up the hose, put on the extensions and set up the ramps.
Clark wrote his own set-up instructions, easy to follow, and in the proper language.
Started cycling the pump and lift, everything went smoothly.
The table wouldn't collapse all the way down without my 300 LBS standing on it.    It went almost all the way, then got hung up. Back to full up again, and a small "clunk".
I checked everything, all looked ok.
After a couple more times it started to travel completely but still heard the clunk, and on the way down it would pause at same point, then after a few seconds it would let go and drop an inch or two real fast. Not good. Started getting that sinking feeling in my gut.
Again I look it over, everything seems fine...
OH WAIT !    I forgot to check the TOP guide channels !
It turns out there was a piece of welding slag in the channel jamming the glide wheel. WTF.
Grabbed the grinder, DONE.
She runs real smooth now, flawless actually. They must not test each assembled unit-( Chinese QC )
But i have to say, aside from that little snafu, this is one hell of a unit. Well-worth $2K
Glad I went with the electric pump, gonna take it out of the little "dolly" it's in and mount it on the wall.
So, if you own and wrench UTV's, golf carts, side-by-sides, atv's, choppers or a Honda Pilot like me, THIS IS THE LIFT YOU WANT, AND THESE ARE THE GUYS YOU WANT TO BUY IT FROM.

All the best,
tagsparky1 | 11/5/2015 12:48 AM
Was this review helpful? Yes No (0/0)
WOW !!
Just finished un-crateing and putting together my new lift to replace my old 1000# unit that would'nt do the job anymore and all I can say is WOW !!--From the great personalized service from Clark to the  super fast tailgate delivery to the lift itself, everything is PERFECT !--The crate job was the best I have ever seen and the lift takes no time to assemble with one other guy. This lift picks my Kubota RTV 900 and my BX2360 w/loader and is far and away the best on the market. It is very heavy duty and I just can't say enough GOOD about my experience with NHProEquipment.
groofy | 12/10/2015 4:33 AM
Was this review helpful? Yes No (0/0)
Works Great
The lift works great. I have done several projects on it since I purchased it and love it. The lift height is great and lift is very stable.
-Rich,  R.F.B. Electrical Co., Inc.
Tyngsborough, MA
rfbelect | 2/1/2016 12:52 PM
Was this review helpful? Yes No (0/0)
My father's wheelchair lift
Going great, had it for about 8 weeks - it is my father's wheelchair lift then on to my toys.
Don, F. Sabattus, Maine
dfournier61920 | 2/8/2016 9:22 AM
Was this review helpful? Yes No (0/0)
We got the unit assembled and are using it. The tech that is using it said he is happy with the performance of the lift. No complaints.  Thanks.
Lee, 21st Century Equipment, Inc.
Sidney, NE
lherz | 2/22/2016 9:30 PM
Was this review helpful? Yes No (0/0)
I love it
I love it - works awesome, would tell anyone about it. Very smooth up and down. Thanks.
-Chad, Tiger, Georgia
CHADBUCHANAN4653 | 3/8/2016 11:42 AM
Was this review helpful? Yes No (0/0)
this lift is much smoother
We just started using the lift and so far it works great. We were using an air lift before so this is a little slower than we are used to but this lift is much smoother.

-Brent, L T Rich Products, Inc / Z-Spray
Commercial Sprayers, Seeders, & Aerators
Lebanon, IN
bmills | 3/14/2016 2:14 PM
Was this review helpful? Yes No (0/0)
absolute must have for a racer
My lift table is wonderful.
It was easy to assemble alone and it has been working perfectly. I have recommended it to several of my friends with UTV/ATVs and when I figure out how I will post a picture on my Facebook page. I actively race 3 different series for UTVs and this is an absolute must have for a racer as we continually work on our machines.
Thanks for everything
Bob, Medina, Ohio
yccbob27 | 5/18/2016 8:13 AM
Was this review helpful? Yes No (0/0)
great product at fair price
The lift is awesome!! I have Polaris Ranger XP900 with all the bells and whistles. Big tires, lift kit, big heavy bumpers and tool holders. Needless to say it is big and heavy, but the lift works great and handles it fine. Also very versatile, right now I have an old mower on it with a couple of the side panels off so I can get closer . I did have a glitch when putting it together , apparently there was a factory setting that was wrong  . Clark was very prompt to get me the info on how to correct it, working great after the quick adjustment. Thanks for a great product at a fair price.

-Jeff, Sugarbush Farm Inc
Woodstock ,VT
sugarjeff | 6/16/2016 8:01 AM
Was this review helpful? Yes No (0/0)
Works great!
Works great! I don't know how I lived without it.
Joel, Pittsfield, NH
jwmrfixit2 | 10/2/2016 12:10 PM
Was this review helpful? Yes No (0/0)
Love my lift!
I love my motorcycle lift we got from you guys!!!!
Darin, Ramsey, Minnesota
ddpcrash | 4/25/2017 9:58 AM
Was this review helpful? Yes No (0/0)
I love it..
I love it..
-Wade, Norridgewock, Maine
wbredeau | 6/12/2017 11:58 PM
Was this review helpful? Yes No (0/0)
Working out very nicely
Working out very nicely, thank you!
-Francisco Equipment
Ravena, NY
jody | 11/30/2017 6:39 AM
Was this review helpful? Yes No (0/0)
great to work with
They were great to work with. I bought the PRO 2500U Lift table and it has helped a lot with work. We put 4 wheelers on it to work on and it has made the process much easier. Everyone there was great at communicating and easy to work with. I would recommend them to anyone that needs their products.
-Haley, Blaine, MN
haleybells1234 | 9/1/2020 9:43 AM
Was this review helpful? Yes No (0/0)
Been great!
-KT Motorsports, Inc.
Sanford, Florida
Been great!_1 | 10/13/2020 6:02 AM
Was this review helpful? Yes No (0/0)
Love it.
I want you to know this lift is amazing. Love it. Works great.
-Bill, Lyman, Maine
bill | 10/16/2020 4:21 AM
Was this review helpful? Yes No (0/0)